Madix Standard Shelves and Shelving

A smooth, dust free edge adaptable for presentations not requiring tag molding. All Base and Upper Shelves as well as End Flats have this option.

---

Retail Shelf Dividers

The solution for maintaining separation of school, office and art supplies. Dividers are 3 3/4" wide x 7 3/4" high x 6 3/4" deep. The dividers clip into front shelf perforations. Minimum product width is 6". End dividers are sold separately and in pairs.

---

Retail Store Chip Displays

Potato Chip Displays for Retial Store Shelving configured from either wire shelves or wire fencing.  Counter Chip Displays, and spinner chip displays all at affordable prices any business can afford.

---

Retail Candy Store Fixture

The Wire Candy Rack for Gondola/Wall shelving is used to display small boxes of candy, cookies and other snack items. Attached brackets allow for easy installation in the Gondola/Wall Uprights. It may be used on either a Base or Upper Shelf.

TThe unit is 24” tall, 8” deep with three shelves top to bottom 4", 5", and 6", respectively. It is available in 36” or 48” widths with 1” OC wire spacing.

---

Retail Store Soda Fixture

Our Plastic Bottle Slides are an important component of the Wire Bottle Display Racks. Bottles slide to the foremost product position whenever a bottle is removed. The panels are removable from the shelf for easy cleanup.

---

Retail Nut and Bolt Bins

-

is intended for organizing densely spaced, lightweight products. It offers a 4" high profile and has a 15 degree down-slope.

IIt can be used for small electrical parts, plastic pipe fittings, trial size items, nuts, bolts, screws, and other parts. Dividers are ordered separately.

---

Gondola Wire Grid Shelving

BBracket with hardware included for hanging Wire Grid Shelves in Gondola/Wall shelving. Sahara is standard finish.

---

Gondola Lumber and Pipe Display

Rigid, heavy duty for vertically displaying lengths of plastic or metal pipe, conduit, guttering or other similar items. Use two shelves per four foot section.

Casters for Gondolas

Kit contains four plated casters, two caster channels, and two “Z” stabilizer bars to create a mobile Gondola section. Plated Casters replace the Upright and Base Shoe Levelers. Hardware included.

MMaximum load capacity is 600 lbs. and must be evenly distributed on both sides of the Gondola. For safety, kit CANNOT be installed on a wall section.

---

Heavy Duty Retail Shelves

for Bottled Drinks and Bagged Pet food and Farm Animal Feed

Shelf bracket is one position. All materials and options available are the same as the Standard Upper Shelves (SUS). Load capacity of 800 lbs. is based on evenly distributed static loading. A 1/4" tag molding is integrally formed into the front edge of shelf. Shelves can be used for heavy bags of pet for and animal feed, bottled drinks like Wine, Soda, and Water.

---

Mop & Broom Display for Gondola Shelving

The Mop and Broom Display is composed of two components which should be ordered together. The Bottom Shelf component rests on the Base Shelf of a Wall or Gondola section. It secures to the shelf with wire tabs that insert into the shelf perforations.

TThe Upper Shelf component mounts into the Standard Uprights. Each unit has five compartments measuring approx. 9 5/8” wide. Available in 20", 22", and 24" depths and 4' width only.

---

Retail Store Clothing Hang Rod

TThe Madix clothes hang rod assembly connects to an existing Madix wall or island Gondola shelving system uprights and is used to hang clothes on a hanger from the tubular hang rod bar.

---

Lawnmower Shelf & Display

The Wire Grid Lawnmower Shelf hangs at a 30 degree downslope in Madix Gondola/Wall sections. It has a 4” front lip with a 1 1/4” price tag molding attached, offering a full inch for customer supplied signage.

Since the shelf is Wire Grid, shoppers may look under the shelf to examine the undercarriage of mowers. Smaller mowers may fit two per shelf. Larger mowers will only fit one per shelf.

MMaximum load capacity of Wire Grid Lawnmower Shelf is 150 lbs.

---

Madix Carpeted Shelves

SStandard carpeted shelf with variable height lip installed over second row of perforations at rear. Lip conceals 2" gap that serves as a power and antenna chase for T.V.'s, VCR's, stereos and other electronic equipment.

---

Retail Store Wire Fixtures

WiWire shelves for all types of retail stores can be used for potato chip displays, candy, bread, baked goods, flowers, potted items, and packaged goods

---

Compact Disc Display Shelves and Shelving

ThThe SBS for Compact Discs replaces the Standard Base Shelf in Gondola/Wall Sections and offers the ideal way to display compact discs or similar merchandise.

---

Cut Shelf Support

The The metal retainer is designed to reinforce shelves that have been cut to accommodate structural support columns. The scrap piece may also be installed for a more pleasing and finished appearance.

---

Retail Shelf Dividers

The solution for maintaining separation of school, office and art supplies. Dividers are 3 3/4" wide x 7 3/4" high x 6 3/4" deep. The dividers clip into front shelf perforations. Minimum product width is 6". End dividers are sold separately and in pairs.

Pegboard Display Hooks

-

DisplDisplay hooks to all types of display shelving or display walls with either pegboard back or a slatwall type finish

---

Gondola Glass Shelves

Smooth pencil polish edges on top quality glass. Sturdy frame assembly has two position brackets for flat or 15° down-slope, ideal for gifts, jewelry and optics. Weight capacity of 40 lb. for Glass Shelf installed on the Glass Shelf Frame.

OverloOverloading could cause sudden and catastrophic failure, resulting in possible personal injury.

---

Madix Jar and Can Shelves

-

Designed for use with Heavy Duty 10 degree Downslope Shelf sold separately, to display small jars or cans. Dividing wires are spaced 3 13/16” OC. Tension clips insert into the shelf perforations at the front and back to allow a simple, secure attachment.

---

Madix Radius Shelves Shelving

-

The Radius Front Shelves offer an innovative way to highlight a new product, a hot sale item or perhaps an entire line of merchandise and may be used in Madix standard Gondola and Wall fixtures, in line with SUS or STP Shelves, and a Standard Base Shelf.

When uWhen used to shelve out both sides of an aisle a unique scalloped effect is attained. This look is an attractive way to display an array of merchandise. 

---

Gondola Transitional Shelves

The Transition Upper Shelf is used with the Transition Base Shelf allowing different shelf sizes in a single run. Pricing is based on the largest depth dimension in the part number. Must be used with Transition Base Shelves and Kick-plates.

The 1 1/4" tag molding is integrally formed into the front edge of shelf surface. The shelf may be displayed flat, 15 degree down-tilt or 30 degree down-tilt. Load capacity of 200 Lbs.